Metrohm 940 Professional IC Vario ONE/HPG - Manual (Page 5)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
Table of contents
940 Professional IC Vario ONE/HPG (2.940.1140)
￭￭￭￭￭￭￭￭ III
Table of contents
1 Introduction 1
1.1 Instrument description ......................................................... 1
1.2 Intended use ......................................................................... 3
1.3 Safety instructions ................................................................ 3
1.3.1 General notes on safety ........................................................... 3
1.3.2 Electrical safety ........................................................................ 3
1.3.3 Tubing and capillary connections ............................................. 4
1.3.4 Flammable solvents and chemicals ........................................... 5
1.3.5 Recycling and disposal ............................................................. 5
1.4 Symbols and conventions .................................................... 5
2 Overview of the instrument 7
2.1 Front ...................................................................................... 7
2.2 Rear ........................................................................................ 9
2.3 Feed-throughs for capillaries and cables .......................... 10
3 Installation 14
3.1 Setting up the instrument .................................................. 14
3.1.1 Packaging .............................................................................. 14
3.1.2 Checks .................................................................................. 14
3.1.3 Location ................................................................................ 14
3.2 Capillary connections in the IC system ............................. 14
3.3 Removing the handle ......................................................... 17
3.4 Removing transport locking screws ................................. 18
3.5 Connecting the drainage tubing and leak sensor ............ 19
3.5.1 Installing the drainage tubing ................................................ 19
3.5.2 Connecting the leak sensor .................................................... 21
3.6 Column thermostat ............................................................ 21
3.7 Connecting the eluent bottle ............................................. 22
3.8 Connecting the eluent degasser ........................................ 25
3.9 Installing the high-pressure pump .................................... 25
3.10 Installing an inline filter ..................................................... 26
3.11 Installing the pulsation absorber ...................................... 27
3.12 Injection valve ..................................................................... 28
3.13 Installing the detector ........................................................ 30
3.14 Connecting the sample degasser (optional) ..................... 31