Metrohm 944 Professional UV/VIS Detector Vario - Manual (Page 26)

3.5 Connecting the flow-through cell
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18 ￭￭￭￭￭￭￭￭
944 Professional UV/VIS Detector Vario (2.944.0010)
2 Connecting the detector outlet
3
4
1
2
Figure 6 Connecting the detector outlet
1 Detector input capillary 2 Detector output capillary
PEEK capillary (6.1831.100).
3 Detector outlet
Labeled OUT. 4 Pressure screw
￭ Unscrew the pressure screw form the OUT detector outlet.
￭ Slide the presssure screw over the detector output capillary such
that a small part of the capillary is visible at the top.
￭ Screw the detector output capillary to the detector outlet with the
pressure screw.
NOTE
The detector output capillary (6.1831.100) is 1 m long and may
not be shortened.