3 installation, 1 about this chapter, 2 initial installation – Metrohm 850 Professional IC AnCat Nonsuppressed User Manual
Page 21: About this chapter, Initial installation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC–AnCat – non-suppressed
￭￭￭￭￭￭￭￭
11
3 Installation
3.1
About this chapter
The Installation chapter contains
￭
this overview
￭
a brief set of instructions for the initial installation of the 850 Professio-
nal IC – AnCat – non-suppressed (see Chapter 3.2, page 11). At each
step you will find cross-references to more detailed installation instruc-
tions for individual components, should you require such aids.
￭
an installation diagram (see Chapter 3.3, page 14), showing a com-
pletely installed instrument.
￭
several chapters with detailed installation instructions for all compo-
nents, including those that are already installed at the time the instru-
ment is delivered.
3.2
Initial installation
Note
A number of the capillaries is already connected at the time the instru-
ment is delivered.
The following work steps must still be carried out:
Installing 850 Professional IC – AnCat – non-suppressed
Note
Each of the steps numbered 3, 4, and 7 are to be carried out for the
anion and cation channels, respectively.
1 Setting up the instrument
2 Installations on the rear of the instrument
￭