Metrohm 894 Professional CVS - Manual (Page 52)

3.4 Connecting devices electrically
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
42 ￭￭￭￭￭￭￭￭
894 Professional CVS
Initializing a dosing unit in viva
Proceed as follows:
1 Select the 894 Professional CVS in the device table of the Configu-
ration section of the program.
2 In the device table, click on the Edit button and select Initialize.
If you have connected a brand-new dosing unit, the following dialog
window is displayed:
Or:
If you have connected a dosing unit that has been previously config-
ured, then the following dialog window is displayed:
3 Click on OK if you are using the brand-new dosing unit.
The following dialog window is displayed: