Metrohm 894 Professional CVS - Manual (Page 27)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
894 Professional CVS
￭￭￭￭￭￭￭￭ 17
3 Installation
3.1 Setting up the instrument
3.1.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.1.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.1.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation and free of vibrations and which provides protection against
corrosive atmosphere and contamination by chemicals.
The instrument should be protected against excessive temperature fluctu-
ations and direct sunlight. Do not place the instrument in the vicinity of an
air-conditioning unit outlet.
3.2 Equipping the RDE measuring head
We recommend equipping the RDE measuring head directly on the mea-
suring head arm.
Preparing the measuring head
The measuring head is supplied with a measuring head cover mounted in
place. The measuring head must first be placed on the measuring head
arm. Proceed as follows:
1 Tilt the measuring head arm up.