Metrohm 930 Compact IC Flex ChS/PP - Manual (Page 53)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
930 Compact IC Flex ChS/PP (2.930.1300)
￭￭￭￭￭￭￭￭ 45
￭ STREAM method (recommended): Ensure that the aspiration tub-
ing for the regeneration solution is immersed in the solution and
that there is enough solution; also check that the detector output
capillary is connected to the suppressor's input capillary for rinsing
solution (labeled rinsing solution).
Alternatively, if two bottles are being used for rinsing and regen-
eration: Ensure that the aspiration tubings for the auxiliary solu-
tions (regeneration solution and rinsing solution) are immersed in
the respective solutions and that there is enough solution in both
bottles.
￭ Switch on the instrument.
MagIC Net detects the instrument and all of its modules.
3 Starting equilibration
￭ Start the equilibration in MagIC Net: Workplace ▶ Run ▶ Equi-
libration ▶ Start HW.
4 Deaerating the high-pressure pump
￭ Push the end of the purging needle (6.2816.040) over the end of
the deaerating capillary on the purge valve.
￭ Insert the syringe (6.2816.020) in the Luer connector of the purg-
ing needle.