Metrohm Vision – Tutorial - Manual (Page 39)

 6 Routine Analysis
32
 NIRS Vision Tutorial – Operation
Exit Routine Analysis/Analyze Stored Data Mode
1. Click on Mode  Data Acquisition
1.10 Recalling Stored Results
The Recall Results mode permits retrieval of Routine analysis results, provided
the operations method specifies that results are to be saved. Samples stored in
this fashion are identifiable by time and date.
1. Click on Mode  Routine Analysis  Recall Results.
2. In the Select Results Type dialog box,
 select “Routine Analysis Results”
 click on [OK].
3. In the Recall Stored Results dialog box, set
 From Date “current date” Time “00:00:00”
 Until Date “current date” Time “23:59:00”
 click on [OK]
4. In the Select Operations Method dialog box,
 select “tutorial”
 click on [OK]
Vision now searches the output project for results that meet the specified time
and date limits.
5. In the Next Result dialog box, click on [Next] to analyze samples one-by-
one or click on [Non-stop] to analyze all samples at once.
Exit Routine Analysis/Recall Results Mode
1. Click on Mode  Data Acquisition