Dulce Systems PRO RX Users Manual - Manual (Page 13)

Page 25
PRO RX g2 Installation and User’s Manual
• Welcome screen of RAID Console after successful login:
5.1.3. Built-in Ethernet
If the PRO RX’s Ethernet port is connected to the network, and you know the IP
address of the PRO RX, you can use any computer on the network via any web
browser to connect to the RAID Console and manage the PRO RX.
You can discover the PRO RX IP address by using the local computer that is
connected to the PRO RX, launch the appropriate RAID Console. The Ethernet
Configuration page is at System Controls > EtherNet Config.
Page 26
PRO RX g2 Installation and User’s Manual
5.2. Change RAID Mode – Deleting / Creating
This procedure will erase all data on the PRO RX.
Changing the RAID mode requires the current RAID Set to be deleted
first, then create a new RAID Set with the new RAID mode.
5.2.1. Delete the RAID Set
From the RAID Console GUI. On the left side menu bar click on
• RaidSet Functions > Delete Raid Set
• Select the Raid Set and check the Confirm box
• Click Submit to delete the RAID Set