DJI iOSD MARK II - Manual (Page 7)

©2012-2013 DJI Innovations. All Rights Reserved.
7
Display Description
The iOSD information is displayed on the screen as shown below.
12.0V
1m
ATT
FS
0
0.0
1
3
4
10 7 9
D
H
P 0 o
R 0 o
5
6
8
13
CH
AV1
m
0.0
s
2
11
12
14
45~179 45~179
5
0
0
15
16
Az 34° 17
90%
18
NO. Function Display Description
1 Power voltage 、 blink
Real time battery voltage of the aircraft power, unit in V. (For
PHANTOM 2 there will be current battery level percentage shown in
addition.)
Blink: first level low-voltage alert, the alert threshold is same to the
protection voltage value set in the assistant software.
2 Channel
CH1 、
CH2 、……CH8
Wireless video transmitter channel selection.
3
Distance between
aircraft and home
points
D
When the home point is successfully recorded, this item will show, unit
in m.
4 Height
H
The vertical height between the aircraft and the take-off point, unit in
m.
5 Control mode ATT 、M、GPS
The autopilot system control mode.
 ATT is Atti mode
 GPS is GPS Atti. mode
 M is Manual mode
6 Fail-safe mode
FS 、 APT 、
GHome
 FS is in Fail-safe mode
 APT is in ground station mode
 GHome is in go home status
7 Pitch attitude P 0 o Positive value means the aircraft nose is up; negative value means the