DJI iOSD MARK II - Manual (Page 10)

©2012-2013 DJI Innovations. All Rights Reserved.
10
Assistant Software
Software and Driver Installation
1. Please download driver installer and assistant software from the iOSD page of DJI website.
2. Connect the iOSD Controller and the PC via USB cable, power on the iOSD Controller system.
3. Run driver installer, and follow the instructions strictly to finish installation.
4. Run assistant software installer, and follow the instructions strictly to finish installation.
Assistant Software GUI
iOSD Setting
Data View
Software Version &
Firmware Version,
etc
Text Indication
Main
Data Communication
Indicator
PC Connection
Indicator
Warnings Setting
Assistant Software Usage
Using the assistant software, adjust the display position of the iOSD information, upgrade the firmware and assistant
software are available. In addition, the flight data will automatically be saved as files in the iOSD, which can be viewed by
connecting to the PC.
1. Power on your computer.
2. Make sure the iOSD is power on. Connect the iOSD Controller to the PC with a USB cable. (If the iOSD is
connected to the autopilot system and both of them are power on, and then switch on the transmitter first.)