DJI Ace One - Manual (Page 28)

©2012 DJI Innovations. All Rights Reserved. 28 |
Product Specifications
 General specifications
Built-In Functions: Autopilot
Tail Gyro
Engine Governor
Flybarless
Return-to-Home Fail Safe
Helicopter Types: Electric and internal combustion powered
Supported Swashplate Types: Normal, Three Servo 120°/140°/90°, Four Servo 90°
Supported Servo output: 500Hz（760us）/200Hz（1520us）for Rudder Channel;
Others follow on your receiver output.
Recommended Transmitter: PCM or 2.4GHz with minimum 7 channels and
Failsafe function available on all channels
Recommended Power Supply: DC 7.4～8.4V (Not to exceed MAX operating voltage of servo motor)
> 4000 mAh capacity, Discharge current more than 5C
Power Consumption: MAX 5W (0.9A@5V, [email protected], [email protected], 0.4A@8V )
Operating Temperature: -5°C to +70°C
（You have to keep the IMU warm if you want to use it under low temperature, could be -10°C even lower.）
Memory: 4GB Flash Memory for flight information recording
 Flight Performance (can be effected by mechanical performance)
Hovering Accuracy: Vertical : ± 0.5m
Horizontal : ± 1m
Suitable Wind Condition: < 8m/s (17.7mph)
Forward / Backward Speed: ± 72 Km/h (44.74mph)
Left / Right Speed: ± 56.7 Km/h (35.77mph)
 Packaging & Shapes
Total Weight: <= 150g
Dimensions: Main Controller: 61mm x 39.6mm x 15.8mm
IMU: 40mm x 31mm x 26mm
GPS & Compass: 50mm (diameter) x 9mm