Appendix, Led indicator description – DJI Ace One User Manual
Page 27
©2012 DJI Innovations. All Rights Reserved.
27 |
Appendix
LED Indicator description
Manual Mode
Tx Signal Lost
GPS satellites found < 5
*All OFF
GPS satellites found < 6
GPS satellites found < 7
Attitude & GPS good
Attitude status fair
Attitude status bad
0
1
3
2
s
0
1
3
2
s
GPS Atti. Mode
GPS Cruise Mode
GPS satellites found < 5
GPS satellites found < 6
GPS satellites found < 7
Attitude & GPS good
Attitude status fair
Attitude status bad
0
1
3
2
s
0
1
3
2
s
Atti. Mode
GPS satellites found < 5
Notices: the sparking indication of
&
&
could be: Single spark, all the sticks return to
center, helicopter hovering; Double spark, stick(s)
not at center, speed command is not zero.
GPS satellites found < 6
GPS satellites found < 7
Attitude & GPS good
Attitude status fair
Attitude status bad
0
1
3
2
s
Compass Calibration Status
Begin horizontal calibration
Begin vertical calibration
Calibration finished
* 3s only
Calibration or others error / Compass abnormal
0
1
3
2
s
System Checking Mode
IMU Lost
Right-LED
Left-LED
0
1
3
2
s
0
1
3
2
s
Please check the IMU connection once above
warning activated.
< 3.5V Low Voltage Warning
< 4.4V Low Voltage Warning
Right-LED
Left-LED
0
1
3
2
s
0
1
3
2
s
！！！You must replace the battery once above warning activated！！！
1
The circle symbols above represent one blink each.
2
The rectangular symbols above represent an LED being solid on
.
3
Both LEDs operate simultaneously, except indicating with
or during power on
.