DJI S900 - Manual (Page 13)

Spreading Wings S900 User Manual
© 2014 DJI. All Rights Reserved.
13
7. Check that every anti-drop screw has been firmly installed in the reserved positions. Thread locker is
recommended.
(1) Remove the anti-drop screws to apply appropriate thread locker.
(2) Replace and tighten.
8. Note that the dampers are 30° silicon rubber. If you use other dampers or vibration absorbing balls, the
quality of your aerial photography may be affected.
Mount the GPS with a bracket to avoid interference from the center frame power board.
Use glue to install the GPS bracket. Ensure it is firm and stable before every flight.
Always test motors using the Assistant Software after installation. Refer to your flight control system
user manual for details.
Mounting Electronics and Wiring
dampers