Brother fax2800 - Manual (Page 67)

S E T U P S E N D 6 - 4
3
To change the default setting, press to select ON (or OFF ), and then press
Menu/Set.
Go to Step 5—OR—For the next fax transmission only, press to select
NEXT FAX ONLY , and then press Menu/Set.
4
For the next fax only, press to select ON (or OFF ), and then press
Menu/Set.
5
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and then go
to Step 6.
6
Enter fax number, and then press Fax Start.
Checking Job Status
Check which jobs are still waiting in memory to be sent. If no jobs are waiting,
the LCD shows
NO JOB WAITING . (See Canceling a Job in Memory below.)
1
Press Menu/Set, 2, 6.
2
If you have multiple jobs waiting, press to scroll through the list.
3
Press Stop/Exit.
Canceling a Job While Scanning the Original
You can cancel a job while you are scanning it into memory by pressing
Stop/Exit. Eject the original by pressing Stop/Exit again.
Canceling a Job in Memory
You can cancel tasks you’ve scheduled, such as Polling Transmit or faxes
waiting in Memory to be sent. (See Checking Job Status above.)
1
Press Menu/Set, 2, 6.
Any waiting jobs appear on the LCD.
If no jobs are waiting, the LCD shows
NO JOB WAITING .
2
If you have more than two jobs waiting, press to select the job you want to
cancel, and then press Menu/Set.
—OR—
If you have only one job waiting, go to Step 3.
3
Press 1 to cancel—OR—Press 2 to exit without canceling.
To cancel another job, return to Step 2.
4
Press Stop/Exit.
or
or
or
or
6 . R E M A I N I N G J O B S
or