Brother fax2800 - Manual (Page 111)

T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 13 - 3
ERROR MESSAGE CAUSE ACTION
OUT OF MEMORY
(When the MFC is
used as a printer.)
Machine memory
capacity has been
exceeded. Press Reset key. Data
remaining in the memory
of the MFC will be
deleted.
• If you have installed the
Windows
®
driver, try
again after setting the
True Type mode to
“Print as Graphics” in
the PRINT menu of
your application
software.
• Reduce the print
resolution or reduce the
complexity of your
document.
NO RESPONSE/
BUSY The number you called
does not answer or is
busy. Or, you may have
reached a number that is
not connected to a fax
machine. Check the number and
try again.
NOT REGISTERED You tried to access a One
Touch or Speed Dial
number that is not
programmed. Set up the One Touch or
Speed Dial number.
See pages 7-1 to 7-2.