Bowers & Wilkins CWM7 - Manual (Page 3)

3
www.bowers-wilkins.com
2. CWM7 Series Basics 1. CWM7 Carton Contents
CWM7 Series in-wall speakers comprise a baffle
carrying the speaker drivers and crossover, an
integrated back-box and front flange, and a
magnetically secured grille. The back box is connected
via external terminals to the speaker cables with the
baffle connecting automatically as it is inserted in the
back box.
A reservoir box can be fitted within the wall either
above or below the back box to enhance the speaker’s
low frequency performance. The CWM7.3 incorporates
a MF/HF baffle that can be rotated 90° to enable the
speaker to be used in landscape orientation for centre
channel applications.
CWM7 Series speakers require wall aperture
dimensions described in the following table:
CWM7 Series speaker assembly (baffle, frame/back •
box, grille)
Reservoir box
•
Cut-out template •
Paint mask •
Port plug •
Blanking Plate •
L-shaped push-lock fastener removal tool •
Allen key (CWM7.3 only) •
Document pack containing Quick Start Guide and •
Warranty information
Environmental Information
All Bowers & Wilkins products are
designed to comply with international
directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical
and Electronic Equipment (WEEE). These symbols
indicate compliance and that the products must be
appropriately recycled or processed in accordance
with these directives. Consult your local waste disposal
authority for guidance.
Model Aperture Height Aperture Width Reservoir Box Clearance
CWM7.3 711mm (28 in) 251mm (9.9 in) 465mm (18.31 in)
CWM7.4 390mm (15.4 in) 226mm (8.9 in) 465mm (18.31 in)
CWM7.5 331mm (13 in) 187mm (7.4 in) 390mm (15.4 in)
1
1
1
1
CWM7.3
CWM7.3 CWM7.4