Clay Paky STORMY CC - Manual (Page 9)

9
PRELIMINARY
4. CONTROL PANEL
CONTROL PANEL
Menu settings status
If no button is pressed after a wait period (about 60 seconds) the display automatically returns to idle status.
Any modified value that has not yet been confirmed with the E key will be cancelled.
7
Fig. 7 - Switching on the projector
The projector immediately turns on when the power cord is plugged
Clay Paky
STORMY
Software release xxx
Adress xxx
Button functions – Menu SET
• If pressed in idle status: Cyclically switches between idle status and menu
settings.
• If pressed while setting a menu: Moves to an upper level without changing
anything (exits the function)
Decreases the value displayed (with auto-repetitions), or passes to the next item
on the menu. For quick access to the minimum parameter value, press the UP
key while holding down the DOWN key.
Increases the value displayed (with auto-repetitions), or passes to the previous
item on the menu. For quick access to the maximum parameter value, press the
DOWN key while holding down the UP key.
Confirms the displayed value or activates the displayed function or opens the
next menu.
SELECT
DOWN
UP
ENTER
S
E
STORMY C71090
STORMY CC C71091
Display inversion
To active this function press at the
same time UP and DOWN keys while
the display is in standby.
The condition is memorized and saved
even for the subsequent switching. To
return to the initial state repeat the
operation again.