Clay Paky STORMY CC - Manual (Page 13)

13
PRELIMINARY
5.3 INFORMATION MENU
INFORMATION MENU – SYSTEM VERSION
It allows to display the firmware/hardware versions of installed machine components:
Strobo firmware Strobo application firmware
Boot firmware Safety software
Driver firmware Driver application firmware
CPU board Hardware revision of CPU Board
CPU SN Serial number of CPU Board
INFORMATION MENU – DRIVER DIAGNOSTIC – LED TEMPERATURE
It allows to display some details about the functionality of the card/cards and LEDs:
• Current Instantly detected operating temperature
• Maximum Maximum detected temperature
• Minimum Minimum detected temperature
INFORMATION MENU – DRIVER DIAGNOSTIC – DRIVER TEMPERATURE
It allows to view some details about the functionality of the driver card for LED:
• Current Instantly detected operating temperature
• Maximum Maximum detected temperature
• Minimum Minimum detected temperature
INFORMATION MENU – DRIVER DIAGNOSTIC – LED CHANNEL
It displays the diagnostics from the driver card: for each of the 4 channels a SYSTEM information and a
ERROR information is reported (the decoding is specifed in the driver’s specifcations).
INFORMATION MENU – DMX MONITOR
It allows to visualize the DMX input level (in bits or as a percentage) of each channel of the projector (value
Between 0 and 255 bit or between 0 and 100%).
INFORMATION MENU – FANS MONITOR
It allows to display the rotation speed (RPM Speed) of the fans installed on the machine.
PwrSp = Power Supply fans.
STORMY C71090
STORMY CC C71091