Clay Paky STORMY CC - Manual (Page 14)

14
PRELIMINARY
5.4 MANUAL CONTROL MENU
5.5 ADVANCED MENU
MANUAL CONTROL – RESET
It allows to reset the projector’s CPU in case of anomalies.
MANUAL CONTROL – CHANNEL
It allows to set a value in bit to the channels, from the projector control panel for manual control of each effect
without the need of a DMX input signal (values between 0 and 255 bits).
> NOTE: To access to the Advanced menu (only recommended for experienced users), you need to set the
access code 1234.
ADVANCED MENU – FIRMWARE UPLOAD
It allows to transfer the firmware from one projector to the others connected to it.
ADVANCED MENU – MODEL SETUP
It allows to change the projector's model set, selecting among the available:
• Undefined
• Stormy
• Stormy CC
STORMY C71090
STORMY CC C71091