8aerial, Rdm controls implemented for glowup series – Clay Paky GLOW UP STRIP 100 & FLIGHT CASE (F21250) User Manual
Page 18

18
GLOW UP STRIP 100
8
AERIAL
Aerial
NOTES: To achieve best wireless
performance, it is recommended to
position GLOW UP with the aerial side
facing the transmitter, when possible.
RDM CONTROLS IMPLEMENTED FOR GLOWUP SERIES
Control
PID
GET
SET
Description controller side
DEVICE_INFO
0x0060
X
IDENTIFY_DEVICE
0x1000
X
DMX_START_ADDRESS
0x00F0
X
X
SOFTWARE_VERSION_LABEL
0x00C0
X
SUPPORTED_PARAMETERS
0x0050
X
PARAMETER_DESCRIPTION
0x0051
X
DMX_PERSONALITY
0x00E0
X
X
DMX_PERSONALITY_DESCRIPTION
0x00E1
X
MANUFACTURER_LABEL
0x0081
X
DEVICE_LABEL
0x0082
X
X
SENSOR_DEFINITION
0x0200
X
SENSOR_VALUE
0x0201
X
RECORD_SENSORS
0x0202
X
DEVICE_MODEL_DESCRIPTION
0x0080
X
Gathers information from the device
Makes the red leds on the addressed device pulse
Reads or sets the DMX address
Reads the firmware version
Gathers the PIDS on the non-basic controls
Gathers information on the controls related to the manufacturer
Reads or sets the channel mode
Reads the description of the channel mode
Reads the manufacturer name
Reads or writes a label on the device
Reads the description of the sensors present
Reads the level of the led temperature sensor
Saves the current temperature level
Reads the text description of the model