Clay Paky GLOW UP STRIP 100 & FLIGHT CASE (F21250) User Manual
Page 16
16
GLOW UP STRIP 100
FACTORY RESET
Resets GLOW UP and automatically sets the Factory Default settings.
1) Press ENTER
A
– a confirmation message appears on the display
(OK?)
2) Press ENTER
A
to RESET or SELECT
S
to return to the previous
Menu.
Default after reset:
“Master Output”-> "Cable + Wireless"
"Repeater"-> "Disable"
"Repeater"-> "Function"->"Repeat & Play"
"Repeater"-> "Direction"->"Wirel. to Cable"
‘’DMX address’’ = 1
"Display"-> Off
“Contrast” = 5
“MOD”-> "Stand Alone/DMX"
"Slave Priority"-> "Cable"
"Led Current -> Battery Mode: 700mA / PowerCon Mode: 1000mA
"Power Mode" -> ''Mixed Mode''
''Auto SwitchOff Opt. -> ''On''
CPU RESET
Used to reset the CPU. Settings will not be reset.
1) Press ENTER
A
– a confirmation message appears on the display
(OK?)
2) Press ENTER
A
to RESET or SELECT
S
to return to the previous
Menu.
TEST
Used to test the correct operations of effects.
1) Press ENTER
A
.
2) Use the
B
and DOWN
C
keys to select the Test function.
3) Press ENTER
A
to confirm the select and start the TEST or SELECT
S
to keep current settings.
Test
Factory
Reset
Advanced
Reset
CPU
Reset