Calculated Industries 6130 v3.0 - Manual (Page 31)

Connecting to a PC (optional)
The Scale Master II has a built-in com-
puter interface connection so that you
can use it with estimating and spread-
sheet software programs. Like your
keyboard, it sends a single value from
the main display to the selected cell in
your program.
Only the value currently on the main
display will be sent to the PC. You must
send a value in order for the PC to re-
ceive it. If you want to send a value,
you would first roll or recall the value,
then you would press
[Set] to send the
value to the PC.
If you want to temporarily override the
send function, press
[Rcl] [Set]. To can-
cel the override function, press the [Set]
key again.
Note: For more detailed information, see
the instructions included with the
interface kit.
User’s Guide – 31