Calculated Industries 6130 v3.0 - Manual (Page 19)

Setting Custom Scales
You can program and store eight Cus-
tom Scales: four in Imperial (English)
and four in Metric Units. The default
units of measurement for Imperial are
Feet-Inches “
FT
-
IN
” and for Metric, Mil-
limeters “ MM ”. If all custom scale set-
tings are filled, the unit will start over
from one.
You can set a custom scale two ways:
by “rolling in” a known distance or by
setting the exact distance.
“Rolling” a Custom Scale
1) Press [Mode] until 1 :
CUS
_x (x being
a number 1-4) appears in the scale
box display.
2) Press [Set] [Scale] . “ ROLL ” will ap-
pear in the main display.
3) Roll desired dimension. “ ROLLING “
now appears in the main display.
User’s Guide – 19