Calculated Industries 3088 - Manual (Page 7)

[Conv] [ 2 ] Fraction set to 1/2’s.
[Conv] [ 4 ] Fraction set to 1/4’s.
[Conv] [ 8 ] Fraction set to 1/8’s.
[Conv] [ 1 ] Fraction set to 1/16’s.
[Conv] [ 3 ] Fraction set to 1/32’s.
[Conv] [ 6 ] Fraction set to 1/64’s.
[Feet] This is an entry and conversion
key. The entry can be in whole or
decimal numbers. This key can also
be used in conjunction with the
[Inch] and [/] keys. Example: To
enter 6 feet 9-1/2 inches, the key se-
quence is: 6 [Feet] 9 [Inch] 1 [/] 2
This key can also be used with the
[Conv] key to convert any displayed
dimension to feet.*
[Inch] This key is an entry and conversion
key that works the same way as the
[Feet] key described above.** This
key can also be used with the [Conv]
key to convert any dimension value
to inches.
[Yds] Yards — This key is an entry and
conversion key. The entry can be a
whole number or a decimal number.
It will also convert any other dis-
played dimensioned number to yards
when used with the [Conv] key.
* Successive presses of the Feet key toggles the display
between feet-inch-fraction (if any) and decimal feet
(10ths, 100ths) formats.
** Successive presses of the Inch key toggles the display
between inch-fraction and decimal (10ths, 100ths) inch
formats.
User’s Guide — 7