Calculated Industries 3088 - Manual (Page 47)

Risers Only — with other than
the 7-1/2” Desired Riser Height
You’re building an access stairway for an
elderly client who can’t handle conventional-
height risers. If the total drop is 3 feet 8-3/4
inches and your “desired riser height” is approx-
imately 5-1/2 inches, find the number of stair
risers, actual riser height, and any overage or
underage remaining.
COMMENTS KEYSTROKES
Clear calculator [On/C] [On/C]
Enter Rise 3 [Feet] 8 [Inch] 3 [/] 4
[Rise]
Enter 5-1/2”riser ht.* 5.5 [Stair]
Recall desired riser ht. [Rcl] [Stair]
Answer: 5-1/2 IN RISER
Find # of Risers [Stair]
Answer: 8 # RISER
Find actual Riser ht. [Stair]
Answer: 5-19/32 IN RISER
Find under/overage [Stair]
Answer: 0 IN RISER
Clear Stair setting [Conv] [x]**
* You do not need to label the 5.5 as “inches” — the
calculator will automatically assume an inch format.
** OPTIONAL: Unless you plan to use this same Desired Riser
Height (5.5 IN) again, it’s a good idea to do an All Clear
[Conv] [x] to reset to the default settings before going on
to the next problem.
User’s Guide — 47