Key definitions basic function keys, Dimensional function keys – Calculated Industries 4094 User Guide User Manual
Page 7
U
ser
’
s
G
Uide
— 5
kEy dEfiniTionS
Basic function Keys
On/Clear Key – Turns on power. Pressing once
clears the last entry and the display. Pressing twice
clears all non-permanent values.
Off – Turns all power off. Clears all non-
permanent memory.
Arithmetic operation keys
–
Keys used for entering
and
numbers.
Convert – Used with the dimensional keys to
convert between units or with other keys to access
special functions.
Store – Used for storing values.
Recall – Used with other keys to recall stored
values and settings.
Memory Clear (M-R/C) – Clears Memory without
changing current display.
Accumulative Memory – Adds value to
Accumulative Memory.
(M-) – Subtracts value from Accumulative Memory.
Dimensional function Keys
Feet – Enters or converts to feet as whole or
decimal numbers. Also used with and keys
for entering feet-inch values (e.g.,
). Repeated presses during conversions toggle
between fractional feet-inch and decimal feet.