Pipe size key – Calculated Industries 4094 User Guide User Manual
Page 21
U
ser
’
s
G
Uide
— 19
(Schedule 120)
Type 120 PlASTIc
(SDR 21)
Type SD21 PlASTIc
(SDR 26)
Type SD26 PlASTIc
(SDR 32.5)
Type SD32 PlASTIc
(SDR 41)
Type SD41 PlASTIc
You can also directly enter a Pipe Type, e.g., Schedule 80, by
entering a number corresponding to the pipe type.
KEySTRoKES
DISPlAy
0.
mATl PlASTIc
80 Type PlASTIc
Pipe Size Key
Pipe sizes are entered with the Pipe Size key. There is a list of
valid pipe sizes for each Pipe Material in the Appendix.
When you have chosen a Pipe Material and Type and then
enter Pipe Size, the following data will be displayed.
For this example we are using 3” Plastic, Schedule 80 pipe.
KEySTRoKES
DISPlAy
0.
1. Choose the Pipe Material:
mATl PlASTIc
2. Enter the Pipe Type:
Type 80 PlASTIc
3. Enter the Pipe Size:
80 - SIZE 3 INch
4. Toggle through the Pipe data:
(Outside Diameter)
oD SIZE 3.5 INch
(Internal Diameter)
ID SIZE 2.9 INch
(Wall Thickness)
ThK SIZE 0.3 INch
(Material)
mATl SIZE PlASTIc