Dimensional function keys – Calculated Industries 4095-C User Guide User Manual
Page 9
10 — P
iPe
T
rades
P
ro
™
Dimensional Function Keys
Feet – Enters or converts to feet as whole or
decimal numbers. Also used with and keys
for entering feet-inch values (e.g.,
). Repeated presses during conversions toggle
between fractional feet-inch and decimal feet.
Inch – Enters or converts to inches. Entry can be
whole or decimal numbers. Also used with for
entering fractional inch values (e.g.,
). Repeated presses during conversions toggle
between fractional and decimal inches.
Fraction Bar – Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8, 1/16) or
improper (3/2, 9/8). If the denominator (bottom) is
not entered, the calculator’s fractional accuracy
setting is automatically used. Results are always
shown in typical building fractional format.
Gallons per Minute (gpm) – Enters or converts to
gallons per minute.
Liters per Second (l/s) – Enters or converts to
liters per second.
Cubic Feet per Minute (cfm) – Enters or converts
to cubic feet per minute.
Cubic Feet per Second (cfs) – Enters or converts
to cubic feet per second.
Degrees Celsius (°C) – Enters or converts to
degrees Celsius.
Degrees Fahrenheit (°F) – Enters or converts to
degrees Fahrenheit.
m
Millimeters – Enters or converts to millimeters.
m
Meters (m) – Enters or converts to meters.
Gallons – Enters or converts to gallons.
Liters – Enters or converts to liters.