Calculated Industries 4065 v3.1 Pocket Reference Guide Construction Master Pro User Manual
Page 3

KEY DEFINITIONS..................................1
Basic Function Keys ............................1
Unit Keys .............................................2
Length, Width and Height Keys (
NOT
AVAILABLE ON TRIG MODEL
#4080) .......2
Circle/Arc Keys ....................................2
Construction Project Keys ...................3
Trigonometric Keys (
TRIG MODEL
#4080)..............................................5
Right Triangle/Roof Framing Keys.......5
Stair Layout Key ..................................7
Customizable Stair Settings ................8
Miscellaneous Functions .....................9
ENTERING DIMENSIONS ....................10
Entering Linear Dimensions ..............10
Entering Square/Cubic Dimensions ...11
EXAMPLES ...........................................12
Adding and Subtracting Strings of
Dimensions ....................................12
Rectangular Area and Volume...........12
Entering Square and Cubic and Adding
a Waste Allowance ........................13
Using Multi-Function
h
Key (
NOT
AVAILABLE ON TRIG MODEL
#4080) .....13
Dividing Dimensions ..........................14
Linear Conversions............................14
Square and Cubic Conversions.........15
Blocks (
NOT AVAILABLE ON TRIG MODEL
#4080)............................................15
TABLE OF CONTENTS