Calculated Industries 4065 v3.1 Pocket Reference Guide Construction Master Pro User Manual
Page 10

P
OCKET
R
EFERENCE
G
UIDE
— 6
R
Enters or calculates the
horizontal leg of a right tri-
angle.
d
Diagonal — Enters or cal-
culates the Diagonal leg,
or Common rafter.
H
Hip/Valley — Calculates
length of the regular or
irregular Hip/Valley rafter.
Ç H
Enters
irregular pitch used
to calculate lengths of the
irregular Hip/Valley and
Jack rafters.
j
Calculates Jack rafter
lengths on the
regular-
pitched roof side.
Ç j
Calculates Jack rafter
lengths on the
irregular-
pitched roof side.
ß 5
— Stores On-center
spacing value (default: 16")
for rafters and Rake-Walls.
Also used for studs.
This manual is related to the following products: