Calculated Industries 4065 v3.1 Pocket Reference Guide Construction Master Pro - Manual (Page 15)

P
OCKET
R
EFERENCE
G
UIDE
— 11
Entering Square/Cubic Dimensions
Examples of entering Square and Cubic
Dimensions:
KEYSTROKE DISPLAY
o o 0.
Enter numeric value and press desired unit
key once to label value as “Linear:”
1 0 0 f 100
FEET
KEYSTROKE DISPLAY
o o 0.
Enter numeric value and press desired unit
key twice to label value as “Square:”
1 0 0 f f 100
SQ FEET
KEYSTROKE DISPLAY
o o 0.
Enter numeric value and press desired unit
key three times to label value as “Cubic:”
1 0 0 f f f 100
CU FEET
Note: If you pass the desired dimensional for-
mat, keep on pressing the dimensional unit key
until the desired result is displayed again.
Note: Feet-Inches format cannot be used to
enter Square or Cubic values.