beautypg.com

Rfi installation – Bully Dog 54100 Rapid Flow Induction Cold Air Intake User Manual

Page 19

background image

18

8. The final step in securing the RFI base is to insert the screw/bolt that goes into the back of
the intake base situated over the fender well. This can either be screwed in using a phillips
head screw driver or using a 10mm socket.

9. Once the intake base is secure the MAF sensor can be plugged in, but before plugging the
MAF sensor in the sensor harness needs to be moved. Unclip the harness from the metal
post that is situated just behind the stock intake tube as in the picture below.

RFI Installation