Bully Dog 54100 Rapid Flow Induction Cold Air Intake - Manual (Page 16)

15
Installing the RFI intake:
With the intake now prepared for installation move to the vehicle and prepare to install.
1. Start by taking the RFI base with the intake tube attached and place it into the engine
bay. When setting it into place, as the picture illustrates below, point it downward to get
the fender tube to go through the hole that leads into the fender well. It is a tight angle so
do not try to force the tube through the fender well. Once the tube is into the fender well
set the intake down into the intake cavity of the vehicle, note that the Stock Intake tube will
need to be moved to the side a bit.
RFI Installation