beautypg.com

Stock removal – Bully Dog 53253 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 14

background image

13

5. The stock filter housing is connected to a plate that sits beneath it by some rubber grom-
mets. It can be easily removed by simple pulling up on the end of the tube. Carefully remove
the entire filter housing in one piece.

.

6. The last step in removing the stock intake is to remove the intake plate that sat below the
stock filter housing and held the filter housing in place. A 10mm socket with a ratchet are
the best tools to use. A 12” extension is recommended to make the job easier.

Stock Removal

Three of the four bolts removed from
the intake plate will be used during the
installation of the Stage 2 Rapid Flow
intake.