Bully Dog 53253 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 12)

11
3A. Using a flat head screw driver loosen both band clamps enough that they will easily
slide off of their current position whether on the throttle body or the MAF senors tube.
3B. Locate the CCV tube, the CCV tube is the
small tube that connects to the side of the
long baffles that go over the engine and are
connected to the air intake tube. Discon-
nect the CCV from the stock intake tube by
simply pulling it out, it is held in place by
a small rubber O-ring and will come out
easily.
3C. The coolant line clip can be a little tricky to disconnect, find a small screw driver to unclip
the locking mechanism. When the locking mechanism is unlocked the clip can be opened up
and removed from around the coolant line, the other line simply pulls off of the clip.
Stock Removal