brite-View LinkE Air BVH-5101C User Manual - Manual (Page 26)

26
z WPA/WPA2:
When selecting WPA/WPA2, you have to add user accounts and the target device
to the RADIUS Server. In the device, you need to specify the Server Network,
Server address, Server Port and Server Key of the target RADIUS server.
„ WPA Algorithms: TKIP, AES, TKIP/AES. Select the encryption type. When
selecting TKIP/AES, the client can use whether TKIP or AES for the
authentication.
„ Pre-Authentication Support option: This option only appears when
selecting WPA2 or WPA/WPA2 as the authentication mode. Enable it to
use this function.
z Radius Server Setting:
„ IP Address: Input the IP Address of the Radius server.
„ Port: Input the port of the Radius server. The default port is 1812.
„ Shared Secret: Input the Authentication Key.
„ Session Timeout: Input the maximum idle time for this connection.