brite-View LinkE Air BVH-5101C User Manual - Manual (Page 13)

13
The device B which has cleared its group attribute will join to the device A which has not.
This step makes device A and B are under the same encrypted network. Additional device C
can be added into device A’s logical network by taking same steps, thus all of the device A,
B, and C in the same encrypted network group. User can assign as many powerline devices
into the logical network group as described in the SPECIFICATION section.
*NOTE: It does not matter which device’s button is pressed first, but please press the second device’s
GROUP button within two minutes after pressing first device’s GROUP button. After 10 seconds, device will
start communicating with device A.
4.2 Remove Device from an Existing Network Group
If you would like to remove powerline device from an existing network group, you can
generate a new group name (referring to Step I) to stop communication with an existing
network group .
4.3 Create Additional Encrypted Network
If you want to create additional private network for your powerline devices that co-existence
with your existing powerline private network group, please repeat the Step 1 & 2 to generate
new private network group for selected powerline devices.
P.S. Users can press the RESET button to reset the network name back to its factory default.