brite-View LinkE Air BVH-5101C User Manual - Manual (Page 20)

20
LAN setup
Item Description
IP Address The Internet Protocol (IP) address.
Subnet mask The number used to identify the IP subnet network.
Default Gateway This is the default gateway for the LAN PCs.
Primary DNS
Server This is the primary DNS server for the LAN PCs which automatically get
DNS IP address from this device.
Secondary DNS
Server This is the second DNS server for the LAN PCs which automatically get
DNS IP address from this device.
DHCP Server
When enabling the DHCP server, there should be NO other DHCP server
in this IP sub-domain, and you must setup the information below.
Start IP Address
This is the first IP Address of the IP pool from which the server assigns the
IP Address to DHCP client PCs.
End IP Address
This is the last IP Address of the IP pool from which the server assigns the
IP Address to DHCP client PCs.
Subnet mask
This is the subnet mask of this domain. The default value is
“255.255.255.0”.
Primary DNS
Server This is the primary DNS server for the LAN PCs which automatically get
DNS IP address from this device.
Secondary DNS
Server This is the second DNS server for the LAN PCs which automatically get
DNS IP address from this device.
Default Gateway This is the default gateway for the LAN PCs.
Lease Time
This is the DHCP lease time. When it is short, the IP release/renew of the
LAN will be faster but the network congestion will be more.
Statically Assigned
You can manually assign the IP Address to the certain PCs. Enter the
MAC Address and IP Address in the table.
LLTD
Enable this function to support LLTD (Link Layer Topology Discovery) for
Windows Vista. It shows the status of connection in the Windows Vista.
QoS
Item Description
IGMP command
packet (join,
leave..)
recommend to set the highest priority (3) to keep it work smoothly
IGMP Stream
recommend to set the higher priority (2) to make sure the good streaming
video and audio quality
Unicast recommend to set priority 1
Multicast/Broadcast recommend to set priority 1
IGMP Reports To
Non-Querier Host default disable but recommend to turn on this function while using
BVH-5101 in China
IGMP Snooping default and also recommend to enable IGMP snooping