Operating instructions, Page 5 – Blizzard Lighting AutoBahn 8 User Manual
Page 5
Page 5
AutoBahn™ 8 User Manual - Rev. A
(c) 2014 Blizzard Lighting, LLC
Rear Side
9.) Power Input
AC power cable input
10.) Neutrik™ EtherCON® Ethernet Port
To connect the ethernet cable
11.) DMX IN A/B
DMX signal intput
12.) DMX Out (1-8)
DMX signal output
3. OpERATING INSTRuCTIONS
STARTUp vIEW:
There are 4 initial “top-tier” menu status screens (shown above) that
you’ll see when you power on the unit. You can scroll through them by
using the
Ip Address can all be edited later within the menu settings.
In the first row of the port status screen; A/B refers to the DMX IN
A/B, and 1-8 refers to DMX outputs 1-8. In the second row of port
status screen; “x” means the port is inactive, “√” means the port is
active, and “—” means the port has been set as disabled.