Blizzard Lighting Pipeline DMX Distributor (Rev A) - Manual

Congratulations on purchasing your new Pipeline DMX distributor. The unit has two inputs and
eight outputs. It features absolute electrical isolation between input and outputs, and between all
of the outputs. There are two types of DMX connectors (3-pin) for each individual channel. Each
DMX output features an independent driver. We strongly recommend that you take time to read this
manual fully before you attempt to use the DMX distributor.
Features:
• Fully compliant to DMX-512 (1990)
• 3pin & 5pin DMX Input and DMX Thru
• 100% electrical isolation between in/output
• 100% electronic isolation between output/output
• Signal & power LED indicator for each output
• Termintor resistor switch for end of a DMX chain
• Power input via IEC connector on rear panel
• Removable rack wings for Rack mount or wall mount
• Anodized aluminum front panel
Technical Specifications:
• Power input: AC120V 50Hz/60Hz
• Consumption: 10W
• Dimensions: 482 x 130 x 44mm
• Weight: 2.6KG
PiPeline
DMX DiSTribuTor