Blizzard Lighting KLIMATEKONTROL DMX Controller User Manual

Page 13

KLIMATEKONTROL Manual Rev A.

Page 13

In manual mode, the chases will move through their individually steps only

when triggered manually by the user.

1. Follow the steps indicated in Section 3.5.3.

2. Press

the

button until the LED indicator for MANUAL

mode is illuminated.

3. Using

the

buttons, move through the steps in the se-

lected chase.

3.5.4 Playback Override

Allows the user to manually override the current output while in Color/Scene

Preset or Chase Playback Mode.

1. Ensure that BLACKOUT mode is not selected, IE that the LED indica-

tor above the button is not lit.

2. Using

the

button(s), select the fi xtures to

be controlled.

3. Adjust the color output using as desired.

4. To return to Color/Scene Preset or Chase Playback Mode, press

3.5.5 Strobe

Allows the user to strobe the current playback. Note: Strobe operates even

when the button is active.

1. Press and hold the button. All currently selected/operat-

ing fi xtures will strobe.

2. Using

the

fader, adjust the strobe speed, from 1

to 20 fl ashes per second.

3. Release

the

button, and strobing will stop.

3.5.6 Blackout

Allows the user to stop all fi xture output immediately (except while strobing

is active).

1. Press

the

button. All output will cease. The LED

indicator will illuminate.

2. Press

the

button again, and playback will resume.