Blakeslee DD-8 - Manual (Page 2)

— 2 —
ELECTRICAL WARNINGS
THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL
ELECTRICAL EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD STARTUP AND
ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL.
READ THIS MANUAL THOROUGHLY BEFORE OPERATING, INSTALLING OR
PERFORMING MAINTENANCE ON THE EQUIPMENT.
WARNING : Failure to follow all the instructions in this manual can
cause property damage, injury or death.
WARNING : Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
WARNING : Electrical connections should be performed only by a certified
professional.
WARNING : Electrical and grounding connections must comply with the
applicable portions of the National Electric Code and/or all local electric codes.
Failure to comply with this procedure can cause property damage, injury or death.
WARNING : Before connecting the unit to the electrical supply, verify that
the electrical and grounding connections comply with the applicable portions of
the National Electric Code and/or all local electrical codes. Failure to comply with
this procedure can cause property damage, injury or death.
WARNING : Before connecting the unit to the electrical supply, verify that
the electrical connection agrees with the specifications on the data plate. Failure to
comply with this procedure can cause property damage, injury or death.
WARNING : UL73 Grounding Instructions: This appliance must be connected
to a grounded, metal, permanent wiring system; or an equipment-grounding
conductor must be run with the circuit conductors and be connected to the
equipment-grounding terminal or lead on the appliance. Failure to comply with this
procedure can cause property damage, injury or death.
WARNING : Appliances equipped with a flexible electric supply cord are
provided with a three-prong grounding plug. It is imperative that this plug be
connected into a properly grounded three-prong receptacle. Failure to comply with
this procedure can cause property damage, injury or death.
WARNING : If the receptacle is not the proper grounding type, contact an
electrician. Do not remove the grounding prong from the plug. Failure to comply
with this procedure can cause property damage, injury or death.