Brother DCP 8065DN - Manual (Page 43)

Control Panel Setup
31
3
Note
You can reset the print server back to its default factory settings using the BRAdmin Professional utility for
Windows
® , BRAdmin Light utility for Macintosh ® or a web browser. For more information, see Using the
BRAdmin Professional utility and the TCP/IP protocol to configure your network printer (for Windows® only)
on page 9 for Windows
® and Using the BRAdmin Light utility to change the print server settings (for Mac OS®
X 10.2.4 or greater) on page 48 for Macintosh ® .
Printing the Network Configuration List
Note
Node Name: Node Name appears in the Network Configuration List. The default Node Name is
"
BRN_xxxxxx " (" xxxxxx " is the last six digits of Ethernet address.).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
1
(For MFC-8460N and MFC-8860DN) Press Menu, 5, 6.
(For DCP-8065DN) Press Menu, 1, 8.
2
Press Start.