Bird Technologies 8141 - Manual (Page 7)

About This Manual
This instruction book covers the models 8141 and 8141-010 Termaline Load
Resistor.
This instruction book is arranged so that essential information on safety is
contained in the front of the book. Reading the Safety Precautions Section be-
fore operating the equipment is strongly advised.
The remainder of this Instruction Book is divided into Chapters and Sections.
At the beginning of each chapter, a general overview describes the contents of
that chapter.
Operation
First time operators should read Chapter 1 - Introduction, and Chapter 3 -
Installation, to get an overview of equipment capabilities and how to install
it. An experienced operator can refer to Chapter 4 - Operating Instructions.
All instructions necessary to operate the equipment, are contained in this
section.
Maintenance
All personnel should be familiar with preventative maintenance found in
Chapter 5 - Maintenance. If a failure should occur, the troubleshooting sec-
tion will aid in isolating and repairing the failures.
Parts
For location of major assemblies or parts, refer to the parts lists and associ-
ated drawings in Chapter 5.
Changes To This Manual
We have made every effort to ensure this manual is accurate at the time of
publication. If you should discover any errors or if you have suggestions for
improving this manual, please send your comments to our factory. This man-
ual may be periodically updated, when inquiring about updates to this man-
ual refer to the part number and revision level on the title page.
v