Bird Technologies 8141 - Manual (Page 15)

Chapter 3
Installation
General
Position the Model 8141 and 8141-010 Termaline Load Re-
sistor to provide at least six inches of unobstructed space
around and above the unit. Place the load to permit the
shortest possible cable length between the unit and the
transmitting equipment.
Operate the load in a horizontal position only, with the han-
dle on top. The load may be free-standing or fastened to any
convenient flat surface. The front and rear fins are made ex-
tra thick and bent outward 90° to form mounting flanges.
Fasten the Model 8141 by its mounting brackets with 1/4
machine screws and nuts or No. 12 wood screws if desired.
The four 9/32 inch holes in the mounting brackets form a
base rectangle of 7-15/32" x 5-1/8" (189.7 x 130.2 mm)for the
Model 8141 and 7/13/32” x 5/1/8” (180 x 130.2 mm) for the
Model 8141-010.
5