Bendix Commercial Vehicle Systems TABS-6 ADVANCED MC SD SHEET - Manual (Page 17)

17
1st
Digit
2nd
Digit
Diagnostic Code
Description
Possible Causes / Repair Information
J1587
(SID/
FMI)
J1939
(SPN/
FMI)
TABS‑6 Adv MC module
10 1
TABS‑6 Adv MC
Internal Error
• Check for damaged or corroded connectors.
• Check for damaged wiring.
• After repairs — or if no issues are found — clear the diagnostic code.
• If the diagnostic code persists, contact your local Bendix
representative before replacing the Bendix ® TABS‑6 ™ Adv MC
module.
254/12 629/12
10 2
TABS‑6 Adv MC
Configuration Error
• Verify the ECU parameters and actual system installation are
compatible using the Bendix ® ACom ® diagnostic software (version 6.1
or higher).
• Re-program the ECU as necessary.
• If necessary, contact your local Bendix representative to obtain the
correct configuration data.
254/13 629/13
10 3
TABS‑6 Adv MC
EEPROM Error
• Verify the ECU parameters and actual system installation are
compatible using the Bendix ® ACom ® diagnostic software (version 6.1
or higher).
• Re-program the ECU as necessary.
• If necessary, contact your local Bendix representative to obtain the
correct configuration data.
254/13 629/13
10 4
TABS-6 Adv MC Not
Configured
• Re-program the ECU to be compatible to the actual system
configuration using the Bendix ® ACom ® diagnostic software (version
6.1 or higher).
• If necessary, contact your local Bendix representative to obtain the
correct configuration data.
254/13 629/13
10 5
TABS‑6 Adv MC
EOL Test Not
Completed
• Perform the Installation Test using the Bendix ® ACom ® diagnostic
software (version 6.1 or higher), or Bendix ® Trailer Information
Module.
254/14 629/14
Diagnostic Trouble Codes
(DTCs)
(continued)