Brother, Brother & Sons Ledonardo2 Ver. 2 - Manual (Page 4)

USER MANUAL
3
LEDONARDO 2
WWW.BROTHERS-SONS.DK
SAFETY
Safety Notice:
It is important to read ALL safety information and instructions in this manual before install-
ing and operating the product described.
Safety symbol used in this manual:
WARNING: Potential injury or damage to persons or product.
WARNING:
It is important to read ALL safety and installation instructions to avoid any damage to the
product and potential injury to yourself and others.
This product is for professional use only and has been designed for indoor use. Exposure to
moisture may cause damage to the product and will void your warranty.
This fixture is designed for use with a specific LED only. Use of any other type LED may be
hazardous and may void warranty.
Do not operate the product if the ambient temperature exceeds 35°C / 95°F
Provide a minimum clearance of 0,1m (4 in.) around fans and air vents.
Do not mount on flammable surface.
Ensure that the fixture is electrically connected to ground (earth)
Only use this product if all cables, connectors and the product itself are undamaged.
Damage caused by inadequate cleaning or maintenance is not covered by the product war-
ranty.
This is a product using High power LEDs. Do not stare directly into the LED at extended
periods of time at a short distance without suitable protective eyewear. Do not look directly
at the LED with optical instruments that concentrate the light output.
No matter the light source, blue light, depending on the wavelength, can be harmful to your
eyes.
SERVICE:
Servicing is to be performed only by qualified personnel. Take precautions to avoid ESD
damage during service.
Disconnect the power before servicing the product.
MAINTENANCE:
This product requires very little routine maintenance, if any, but has special cleaning
instructions:
Disconnect fixture from power and allow it to cool for 10 min.
Vacuum or gently blow away any dust from fan blades and grills
Very gently clean the LED with Isopropyl alcohol.
Clean the lenses with a soft damp cloth.
Power:
Never connect to dimmer power