Brother, Brother & Sons Ledonardo2 Ver. 2 - Manual (Page 16)

USER MANUAL
15
LEDONARDO 2
WWW.BROTHERS-SONS.DK
SOFTWARE MENU
Default values indicated by bold font
Addr 1 DMX adress value 1 - 512
M
ode Resolution 8 bit resolution
16 bit resolution
Response Slow (fade between values)
Fast (snap between values)
Strobe OFF
On - (adds 2 strobe channels)
Curve Square dimmer curve
Linear dimmer curve
Fan HIGH - No fan speed limit
LOW - Fan speed limited (Silent)
noDMX Action when loss of DMX signal:
HOLD - last received DMX value
OFF - Sets output to zero
MAN - Go to Manual DMX value
Display OFF 2n - Display off after 2 minutes
ON - Display always on
Tools Ver Shows software version - READOUT ONLY
HW Ver Shows hardware version - READOUT ONLY
Temp LED temperature - READOUT ONLY
DMX In 3 first digits shows DMX adress - READOUT ONLY
3 last digits shows DMX value - READOUT ONLY
Reset
Confirm (Reset unit by pressing enter)
test Fan Fan test
First 2 digits - set fan speed level 0 - 31
Last 3 digits - RPS (rounds per second) - READOUT ONLY
test display Display test - all seven segments of each digit on - READOUT ONLY
....continues on next page
Software vers. 1_3_00