Bang & Olufsen BeoPort - User Guide - Manual (Page 5)

5
Before you start…
To ensure a successful BeoPort
installation, follow the sequence of
instructions on this page exactly.
1 Make sure that your setup meets the
requirements listed below
2 Setup your BeoPort (p. 6)
3 Connect BeoPort (p. 7)
4 Install BeoPort, including TV tuner card
and driver (pp. 8–9)
5 Configure BeoPort (p. 10)
6 Register (p. 11)
BeoPort requirements
To be able to install the BeoPort
application, your PC must meet the
following requirements:
Hardware requirements
– Pentium-class PC (233 MHz or above) with
50 MB available disk space
– Min. 64 MB RAM
– Super VGA monitor with a minimum
resolution of 800 × 600 and 16-bit colour
depth
– One available USB socket
Operating system requirements
– Windows 2000 or XP
– DirectX 8.0a or newer
– Media Player 9.0 or newer
Browser requirements
– Internet Explorer version 4.01 or newer
Browser configuration requirements
Select the following preferences in Explorer
Support:
– Download signed ActiveX controls
– Run ActiveX controls
– Script ActiveX controls marked safe for
scripting
– Utilize active scripting
TV tuner card
If you have a TV tuner card, make sure that it
is supported by BeoPort. For continuous
updates on compatible TV tuner cards, refer
to www.beoplayer.com. Note that some TV
tuner cards may necessitate that your PC
meets other hard ware requirements than
those listed above. Refer to the tuner card
documentation for this information.