Bang & Olufsen BeoPort - User Guide - Manual (Page 11)

11
Option setting
It is important that BeoPort is set to the
correct Option, corresponding with your
setup.
To make an Option number setting…
> Select CONFIG to access the menu.
> Select the Advanced tab to call up Option
settings.
> Select the appropriate Option number from
the list; 0, 2, 4 or 6.
For further information about Option setting,
refer to page 6.
Registration of BeoPort
Once you have initially configured BeoPort,
you are prompted to register, if you have
access to the Internet at that time.
Although you can use BeoPort without it,
registration is necessary in order to receive
the service provided by CDDB*. Naturally,
Bang & Olufsen handles the information
provided during registration with utmost
confidentiality.
If you have not registered…
A registration form automatically appears on
screen.
> Click New User and fill out the form.
If you have already registered…
> Enter your User Name and E-mail address.
In order to receive CDDB information, your PC
must be connected to the Internet and be on-
line. If you have no Internet access, you are not
prompted to register, but if you obtain Internet
access at a later date, you will be prompted to
register.
*CDDB is a storage and distribution service for
music information. CDDB is a service of
Grace Note, Int. The information you can
receive from the CDDB database, is the ‘tag’
information, which often accompanies your
N.MUSIC tracks, such as artist name and album
title. Be aware that the service will only
function properly if your internet connection is
open while you use BeoPort.